Quantcast
Channel: SCN : Popular Discussions - SAP Test Data Migration Server
Viewing all 2460 articles
Browse latest View live
↧

Advantages of a shell system

September 13, 2012, 7:49 am
$
0
0

Hi,

We have had TDMS running for a while, DMIS 2006_1_700. We primarily use it to refresh QA and a dev client from production. In the past we have taken a flash of production and used the results as the source system. We run a TDTIM for 3 months and it takes several days. For development we push the results into a new client that has had a client copy with SAP_UCSV.

Our management has gone to Tech Ed and talked with unspecified other customers who have assured them that this can all happen much quicker. Apparently they pull directly from production, possibly devoting an application server in production to the effort. I've been told that using a shell system will speed the process up dramatically.

 

Would creating a shell speed things up? I assume we whack an existing client, create a shell client with TDMS, and then run TDTIM. Is that the process?

 

Does anyone have suggestions on running TDMS against a live production system, other than avoid high activity (since it takes days to run, it isn't clear how that is possible)?

 

Best regards,

Russ

↧
Search

Scrambling payroll and custom fields.

April 5, 2013, 11:49 pm
$
0
0

Dear Friends,

 

We are on TDMS4 (DMIS   2011_1_700 : 003DMIS_CNT: 2011_1_700 : 003 and DMIS_EXT 2007_1_700: 007)and want to scramble data.

 

1. This is on 99 international specific, and due to some flaw we have multiple name fields and we want to scramble these custom fields.

2. We want to scramble the Payroll information as well.

3. We are using the PA & PD transfer scenario.

 

I am not sure where to start. I copied from the workcenter the standard rules

it copied for me. Vendor, Material, customer and personal data super groups.

, and modified the First name and Last name in personal data to fixed and did the transfer and it was successful. 

 

1. I do not find payroll informtion rules in personal data super group, is there some other super group that i should copy with some other technique, I am not sure. I am doing this on Central/Control system client 200.

 

2. I tried to create custom scrambling rules, and I dont know where to start, so I started to run CNV_TDMS_HCM_SCRAM transactions:

 

CNV_TDMS_HCM_SCRAM.jpg

This leads to short dump, and I have attached the short dump as attachment.

 

Than I tried to do something with CNVMBTTWB, if I try to create new package from here, it will give msg "package not in namespace" I tried with 90012,91234 and z1234 nothing worked. I created new package from project, and went to the next screen with maintain button and tried to create rule and it fails saying "Code Could not be unlocked" I searched for OSS notes and found  1629452 which is not relevant to us.

 

Your support in this regard is highly appreciated.


            
1629452
  
↧
↧

Running Activate Database Views activity in parallel in TDMS 4.0

August 21, 2014, 9:59 am
$
0
0

Hello Colleagues,

 

We are running TDMS4.0 and as we need to hasten the process, we would like to ask if the activity ACTIVATION OF DATABASE VIEWS can run in parallel with activity DATA SELECTION START  FOR TDMS HEADER TABLE? In the guided procedure, the ACTIVATION OF DATABASE VIEWS is dependent on the completion of DATA DELETION START IN RECEIVER SYSTEMS (which is already completed as per screenshot)

 

As per searching other KBA's database views are activated that may be de-activated after drop of tables in the receiver system. Which was why the prerequisite of this is completion of DATA DELETION START IN RECEIVER SYSTEMS.

 

Thus, we would like to know if the activity ACTIVATION OF DATABASE VIEWS can run in parallel with activity DATA SELECTION START  FOR TDMS HEADER TABLE? Kindly see screenshot

 

 

Many thanks,

Meinard

↧

Createtablespace.sql is creating tablespaces in wrong sid

August 10, 2009, 4:01 pm
$
0
0

Hi,

 

We are in the process of performing system copy of EHP4 for TDMS shell creation using standard system copy process as suggested by sap.

 

During export while SAPInst asked for Import Migration Directory we provided the export dump of target system ( modified as per TDMS shell creation)

 

During system copy we are getting the error during create table space phase. SAPinst is creating the tablespace with source system SID. .i.e instead of T02 it is taking P02.

 

 

 

create tablespace P02#USER1D

  in nodegroup SAPNODEGRP_T02 pagesize 16k  extentsize 8 prefetchsize automatic

  no file system caching

 

Because of that we are getting following error during import phase.

 

ERROR      2009-08-10 07:24:33.154 [iaxxinscbk.cpp:260]

MDB-01999  Error occured, first error is: <SQL0204N  "P02#DDICD" is an undefined name.  SQLSTATE=42704>

 

 

Please suggest.

 

Sanjay

↧

Partner Test keys

May 21, 2014, 1:38 am
$
0
0


Hi, does somebody where to get these yearly license keys for partners?

Can they be downloaded from the channel page?

 

Thanks

Georgios Kazakidis

↧
↧

SAP TDMS - Infotype changed and giving an error on import

May 22, 2014, 7:20 am
$
0
0

Hi all,

 

I have the following situation.

In a working SAP TDMS 4 HCM Scramble setup one of my colleagues had to add extra fields to an infotype.

The issue i'm having now is that for this infotype the import is failing because of "Wrong structure in IMPORT statement for structure".

I checked it and the structure is the same and active on all systems.

Is there a way to 'regenerate' the export structure?

Where and how do I do/select/find this?

 

 

 

Kind regards,

Johnny Ramaekers

↧

DDIC activation failed for one of the structures listed below (Table J_3RFREP_VALFMT):

May 27, 2014, 7:10 am
$
0
0

Hi All,

 

System Analysis phase sub-activity Exec. of Table Analysis Programs for Data Selection/Deletion completed with error, in Preparation of Migration Objects for Data Transfer. Below log messages appears...

TDMSerror.jpg

 

Mass processing: Start of definition phase for ID 01W on 27.05.2014 at 14:02:15

Start creation of migration object ZJ_3RFREP_VALFMT_01W

DDIC activation failed for one of the structures listed below (Table J_3RFREP_VALFMT):

/1CADMC/950000000598782J_3RFRE

Mass processing: End of definition phase for ID 01W on 27.05.2014 at 14:02:27

 

Please help what to check and how to fix. Thanks.

 

Regards,

Philip

↧

TDMS - System Analysis Phase completed with errors

May 28, 2014, 11:25 pm
$
0
0

Hi All,

We are running TDMS copy, currently running at System Analysis phase, however we encountered status message "completed with error" within sub-step "Generation of Run-Time Objects for Data Transfer". When we checked the tasks, we found below error messages...

 

Error while generating runtime objects for ZJ_3RFREP_VALFMT_01W

Syntax error in function module /1CADMC/OLC_950000000614930

Error message: Type "DECFLOAT16" is unknown

 

We tried re-executing the step several times but no success.

 

Can anybody suggest how to fix the issue. Thanks.

 

Regards,

Philip

↧
Search

MasterShell Import Problems

May 22, 2014, 3:51 am
$
0
0


Hi there,

 

after upgrade our systemlandscape up to SAPNetweaver 7.4 ERP6 EHP7 SAP_BASIS 740 trying to establish a new TDMS MasterShell via Export out of our TDMS Sendersystem into the Receiver System - Doing the Shell Export like every time but getting new Import Errors when trying to import the Dump - I do this with the newest SWPM 1.0 SP05 and the newest R3* Binaries based on SAP Kernel 741_REL -  getting following ERROR in a lot of relevant LOG File from the Import -

 

(RFF) ERROR: no entry for table "ADRVPS" in "J:\Export_S50\ABAP\DATA\SAPAPPL0_13.TOC", aborting the task

(DB) INFO: disconnected from DB

 

I could see in older LOG Files from former MasterShell Scenerios that the same ERROR where in the same .LOG File BUT the behaviour of R3LOAD was going further on and finieshed my Export - I did the last MasterShell Import last year in November with SWPM 1.0 SP02 and our System was based on SAP_BASIS 731 EHP6 with SAP Kernel Release 721_EXT -

 

I found following notes which explaning that new R3load Behaviour but that is not the solution for my problem cause especially with MasterShell Creation it is normal to have a huge amount of tables excluded from Data Export - thats the sense of doing a MasterShell getting a small running system in which I can transfer a time based reduction of transaction data - relevant notes I found are 1914260 and 1905316

 

I have openend a SAP OSS Call but they are still analysing the export/import logfiles - I would need a R3load of the new SAP Kernel Release 741_REL with the behavior of the older one

 

Did anybody have similiar experiencies like my case

 

thanks for feedback

 

peter wegner

 

SBB AGSBB Informatik IT-SCF-SIN-SCC
Lindenhofstrasse 1, Worblaufen CH-3000 Bern 65

↧
↧

TDMS functionality question - Time slice scenario

December 25, 2013, 11:48 pm
$
0
0

Dear Experts,

I like to ask few questions on TDMS functionality related to Time slice scenario.

 

  1. Does TDMS time-based slice run include attachments? We have lot of attachment in DMS_CONT1_CD1 table and SOFFCONT1 table. Does attachment data will be trasferred to  Receiver system based on time slice scenario?
  2. What tables/data is excluded in TDMS time-base slice scenario run?
  3. Can I use existing PRD System to run tim-base slice run to create receive system?
  4. How much (estimate/rough/approx.) time does a typical TDMS time based slice run takes for 12 months of data from source/Sender system size 2.5 TB?

 

Please advice.

 

regards

Asad

 


↧

Client Deletion takes too much time

December 2, 2009, 7:46 am
$
0
0

Hi,

We are now performing Cleint deletion (ERP Package for Client Deletion) in varios clients. It is taking approxmate 15hrs to complete the phase "Start Deletion of Data in Receiver System - TD09P_START_JOBS.

 

We have 6 clients to delete. Is ther any way to speed up the process?

will any manual deltion of tables will help?

 

Please suggest

 

thank you

 

Raki

↧

Modify Table and Index Size Activity

December 21, 2012, 6:10 am
$
0
0

Hi,

I'm trying to use TDMS server 4.0 with package Shell Creation for SAP ERP.  In activity "Modify Table and Index Size", I have followed the instructions and executed the activity, but it's always remains in status "Execution Terminated" and I cannot follow with next activity.  There is no error in ST22 or SM21 in TDMS Server or Sender System.  I don't found any log for this activity...

 

Thank's for your help.

 

Best Regards

Juan Carlos Barraza

↧

HCM Object Selection - can not select anything?

May 13, 2014, 8:18 am
$
0
0

Hi all,

I'm trying to get through the HCM document for TDMS and I'm completely stuck at the moment.

In the phase "Assign Objects to a selection ID", if I carry out the same option as in the examples, I receive NO output at all. Even if I put the selection criteria less than in the examples, downgrading it even to the minimum (let's say I only select Object Type, Object ID and Plan version) I see no output, whatever I choose as object type.

 

When I take a look to the HR tables, I see the data.

 

What can be the cause of this?

Am I doing something wrong?

 

Somebody an idea around this?

 

 

TDMS 4.0 SP 6 installed in all involved systems.

 

Thanks!

 

Johnny Ramaekers

↧
↧

TDMS Copy selected company code data

June 15, 2014, 10:18 pm
$
0
0

Hi Gurrus

 

I have one question if you can answer .

 

we are using TDMS to transfer data or refreshing data with specific dates right ?

 

now scenario is we have multiple company code and we need to copy only one company code data plus config from source to new destination client.

 

Is it possible in TDMS ?

 

 

 

 

regards

Muhammad Arshad

↧

How to execute a completed TDMS project?

June 16, 2014, 2:55 am
$
0
0

Hello,

 

How can I restart a completed TDMS project?

I mean, I have executed the project ABC successfully and I have updated the project status to Completed. Now that I have a good finished project, I want to execute the same project again because I need to refresh my data,  How can I do that? what is the procedure?

 

Thanks in advance,

Best Regards,

Walde Requena

↧
Search

Data in table EQUZ not copied by TDMS

June 10, 2014, 11:02 am
$
0
0

During “Data Deletion in Receiver System”, TDMS deletes from this table, however, during “Data transfer”, this is not included in the table where data  is transferred.

 

Sender system has 5,862, but Receiver system only has 2, after the TDMS data copy.

 

Can anyone advise why this table is not copied from receiver?

 

Also, can you provide how can we be able to transfer this uncopied data from the sender system to the receiver system? Is this still possible via TDMS?

 

Thanks,

Philip

↧

System REFRESH without REC/CLNT OFF

June 11, 2014, 8:53 am
$
0
0

Hello Expert Zone
,

 

Wondering if we can do the system refresh without making any changes on REC/CLNT OFF,.

Currently it is set to ALL at the sender system/receiver system.

 

Also, I am curious to know about the NON ARCHIVE LOG mode., as I heard that we need to stop  the DB and start again..

So, my question to the above is:

Imagine if we are trying to extract the data/ or do a system refresh using TDMS connected to the PROD system, are we supposed to bring down the system to do the above activities?  In this case, I believe it would be a RISK to bring down the prod system down,..

 

Appreciate your solutions/inputs.

 

V.

↧
↧

Data Transfer Phase - Data Deletion Start in the Receiver System

June 3, 2014, 5:33 am
$
0
0

Hi All,

 

Our migration package is now running at "Data Deletion Start in the Receiver System" step. However, it's running there for almost 3days now. We noticed that is running for table VBOX and FAGLFLEXA. It appears that the deletion is running for table VBOX for more than 17 hours now, while for table FAGLFLEXA, it seems calculating for 9 hours.

 

TD09P_FAGLFLEXA  @4A@ 0 @DH@ 03.06.2014 04:14:27   376.372.732 330.056.308 0 0 09h 12m 56s

TD09P_VBOX 1 @4A@ 33 @DH@ 02.06.2014 19:47:56   0 107.988.496 36.203.826 36.203.826 17h 39m 27s

TD09P_VBOX 2 @4A@ 34 @DH@ 02.06.2014 19:47:56   0 107.958.008 36.752.646 36.752.646 17h 39m 27s

TD09P_VBOX 3 @4A@ 33 @DH@ 02.06.2014 19:47:56   0 107.958.008 36.374.570 36.374.570 17h 39m 27s

TD09P_VBOX 4 @4A@ 32 @DH@ 02.06.2014 19:47:56   0 107.958.008 35.240.342 35.240.342 17h 39m 27s

TD09P_VBOX 5 @4A@ 33 @DH@ 02.06.2014 19:47:56   0 107.958.008 35.892.828 35.892.828 17h 39m 27s

TD09P_VBOX 6 @4A@ 33 @DH@ 02.06.2014 19:47:56   0 107.929.235 35.947.710 35.947.710 17h 39m 27s

 

These are large tables. Can anyone share how can we optimize the deletion and calculation activity on these tables, and also share how can we optimize the TDMS processes runtimes, in the System Analysis Phase and Data Transfer Phase, as these 2 phase is where we encountered the to slow runtime.

 

We are at below level.

DMIS 2011_1_700 0005 SAPK-11305INDMIS

DMIS_CNT 2011_1_700 0005 SAPK-11305INDMISCNT

 

We would appreciate your response for inputs. Thanks.

 

Regards,

Philip

↧

Links, Documents, Support Pack Schedule

December 8, 2008, 8:16 pm
$
0
0

SLO at Service Market place

 

http://service.sap.com/slo

 

http://service.sap.com/tdms

 

Documents:

 

Master Guide

 

http://service.sap.com/instguides  -> SAP Components -> SAP Test Data Migration Server -> TDMS 3.0

 

Operations Guide

 

http://service.sap.com/instguides  -> SAP Components -> SAP Test Data Migration Server -> TDMS 3.0

 

Security Guide

 

http://service.sap.com/security -> Security in Detail -> SAP Security Guides -> SAP Test Data Migration Server

 

TDMS WIKI

 

https://wiki.sdn.sap.com/wiki/display/TDMS

 

SAP TDMS HCM

 

TDMS HCM Solution - 01 Overview

http://service.sap.com/~sapidb/011000358700001442252009E/index.htm

 

TDMS HCM Solution - 02 Customizing and Authorization Concept

http://service.sap.com/~sapidb/011000358700001442272009E/index.htm

 

TDMS HCM Solution - 03 Scrambling

http://service.sap.com/~sapidb/011000358700001442292009E/index.htm

 

TDMS HCM Blogs and Articles

http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d0bbb9bd-22b1-2d10-9483-e1d20a7ae5af

SAP Test Data Migration Server  for HCM

 

Support Pack Schedule

 

SP                  Date of Release

 

SP05                  25 July,   2007

SP06                  28 Sept,  2007

SP07                  21 Dec,   2007

SP08                  01 May,   2008 

SP09                  26 Aug,   2008

SP10                  05 Dec,   2008

SP11                  02 Apr,    2009

SP12                  08 July,    2009

SP13                  11 Dec,    2009

SP14                  31 March, 2010

SP15                  02 July,    2010

SP16                  02 Nov,    2010

SP17                  15 Apr,    2011

SP18                  12 Aug,   2011

SP19                   30 Nov, 2011

SP20                  05 Mar, 2012

↧

DMIS SP2 installation error... 2EENR893INumber range object "IUUC_TABID" " "

June 9, 2013, 5:18 am
$
0
0

Hello,

 

DMIS SP2 installation, I get an error.

XPRA 11302INDMIS package SAPK-phase gives the following error.

Do you have that information?

 

 

 

######################################

Execution of programs after import (XPRA)

Transport request   : SAPK-11302INDMIS

System              : YSP

tp path             : tp

Version and release: 372.05.70 700

 

 

 

 

Post-import methods for change/transport request: SAPK-11302INDMIS

    on the application server: ygeccp9

 

 

Post-import method AFTER_IMP_NROB started for NROB L, date and time: 20121227191942

2EENR341IPlease specify a long text"IUUC_TABID"

2EENR893INumber range object "IUUC_TABID" " "

2EENR341IPlease specify a long text"IUUC_TABID"

Errors occurred during post-handling AFTER_IMP_NROB for NROB L

AFTER_IMP_NROB belongs to package SZN

The errors affect the following components:

    BC-SRV-NUM (Number Range Management)

Post-import method AFTER_IMP_NROB completed for NROB L, date and time: 20121227191942

 

BR,

 

Ocak

↧
Viewing all 2460 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>